This is a PROFESSIONAL SHOP GRADE motorcycle connector kit.
Repair, modify, or build motorcycle wiring harnesses with pro grade terminals, connectors and crimper tool.
The electrical items sold here are some of the best OEM quality replacement connectors, terminals and plugs I have found.
These are the same terminals, plugs and connectors I use to repair, modify or make wiring harness in my shop.
I have tried several other "cheaper brand OEM style connectors" in the shop, but I no longer use or sell them.
The cheaper terminals, plugs and connectors many look the same but they are not!
TRUST ME all terminals, plugs, and connectors are not of the same quality. The cheaper products appear to perform the same when new. After being exposed to the rigors of motorcycle use, the weakness begins to appear (some times very quickly). Often cheap connectors become brittle in a very short period of time. The connectors and terminals do not appear to hold there connection during electrical heat cycle nearly as well as the Japan made products.
The Professional Grade kit contains:
(1) Plastic Case
(20) B-1 Connector
These High Quality Japanese OEM style 3.9mm Male Bullets are the standard size fits most Japanese & European motorcycles from the early 1970's on. Mates with B-2 and B-16 connectors
(20) B-2 Connector
These High Quality Japanese OEM style 3.9mm Female sockets are the standard size fits most Japanese & European motorcycles from the early 1970's on. Mates with B-1
(20) B-3 Sleeve
High Quality Japanese made 3.9mm Male bullet PVC insulation cover. Use in conjunction with male bullet B-1
(20) B-4 Sleeve
High Quality Japanese made 3.9mm Female bullet PVC insulation cover. Use in conjunction with male bullet B-2
(20) B-5 Terminals
High Quality Japanese made 2.8mm Male Spade terminal pin. Mates with B-6 Female terminal pin. Use in Plugs B-7 in the kit.
Also fits Many small terminal OEM plugs.
(20) B-6 Terminals
High Quality Japanese made 2.8mm Female Spade terminal pin. Mates with B-5 male terminal pin. Use in Plugs B-7 in the kit.
Also fits Many small terminal OEM plugs
(2) B-7 4 pin coupler set
High Quality Japanese made (4) pin non-locking connector set. The connector uses 2.8mm pins B-5 for male pins and B-6 for Female pins. Each set includes 1 male and female piece.
(20) B-9 Male Terminal Pin
High Quality Japanese made 6.3mm Male Spade terminal pin. Mates with B-10 Female terminal pin.
Use in Plug B-37R in the kit.
Also fits Many Large terminal OEM plugs.
(20) B-10 Female Terminal Pin
High Quality Japanese made 6.3mm Female Spade terminal pin. Mates with B-9 Male terminal pin.
Use in Plug B-37R in the kit.
Also fits Many Large terminal OEM plugs.
(20) B-21 5mm Terminal Ring
(20) B-22 6mm Terminal Ring
High Quality Japanese made 5mm and 6mm terminal rings
(20) B-48 splice connector
High Quality Japanese made splice
(1) B-37R 2 pin connector with locking retainer
High Quality Japanese made (2) pin locking "T" connector set. The connector uses pins 6.3mm B-9 for male pins and B-10 for Female pins. Each set includes 1 male and female piece.
(1) FRH-07 Professional Terminal Crimper Tool For B-Type connectors (Do not use on F-type)
The FRH-O7 Terminal Crimpers are design to crimp the B-type terminals. These crimpers will cut, strip and crimp. I use the exact crimper in my shop. These crimpers can give a factory quality crimp on B-type terminals. They are designed to roll the terminal crimp ears around wire strands. Creating a much stronger and conductive connection to the wire. Most wire crimpers only smash the connectors flat. I have stripped, cut and crimped hundreds of terminals and wires with a FRH-07 crimper tool. After years of use it still operates as good as new. This is a very high quality tool. I prefer this tool over the one step ratcheting tools. The FRH-07 will fit in locations the other tools can't fit. I am also able to check the connector to wire connection before crimping into the insulation. You can not do this with the one step tools. The one step crimpers may give a false impression of a tight connection, by correctly crimping the insulation, and not the connector to wire crimp.
Refills for connectors and pins available soon.
